Pump housings
Sealing faces, cores, series consistency
- Process
- Green-sand machine moulding
- Focus
- core-intensive, designed as pressure-retaining
- Material
- GJL / GJS
- Quality
- DIN EN ISO 9001:2015
Sealing faces, cores, series consistency
Röth Guss in Mosbach produces core-intensive pump housing raw castings in green-sand machine moulding. Our strength on these products is a uniform microstructure, a clean surface and dimensional accuracy on sealing and connection faces, often in the CT 10 / DCTG 10 guide band to ISO 8062-3. Tightness follows machining and agreed inspection, not the as-cast state.
Pressure-retaining pump housings with complex cores need stable mould and core practice: HWS for 5–200 kg and core-intensive housings, Disamatic for 0.2–30 kg. MAGMA simulation lays out the process; DIN EN ISO 9001:2015 documents it before the series runs.
Challenge and solution
Pressure-retaining housings with complex cores
Internal channels and core assemblies must stay in position. Experience in core practice and controlled solidification reduce defect risks at metal accumulations.
Dimensional accuracy on sealing and connection faces
Connection flanges and sealing faces need a reproducible raw-casting geometry so machining and assembly stay predictable in series.
Homogeneous microstructure for series quality
A uniform microstructure and documented process control, including spectral and sand testing, are the basis for robust pump parts.
Examples from the pump industry
Frequently asked questions about pump housings
Which pump housings does Röth produce?
Core-intensive pump housing raw castings in green-sand machine moulding, focused on a uniform microstructure and accurate sealing and connection faces. Tightness follows machining and agreed inspection.
On which plants are pump housings cast?
Complex, core-intensive housings typically on the HWS line (5–200 kg). Small-format series parts on the Disamatic (0.2–30 kg, from about 20 moulds per lot).
Which materials are possible?
Grey and ductile iron from the Röth material programme (DIN EN 1561 / 1563). Selection depends on pressure load, damping and machinability.
Enquire about pump housings
Describe your casting. We will advise on process, material and capacity.
Enquiry about Pump housingsEnquiry about Pump housings
Describe your project. We will review castability, capacity and lead times.